recording electric bass guitar | electric guitars by weight

Bitcrusher filters: Bitcrushers rely on conversion of the audio signal into a digital format (ADC) and the reduction of sound fidelity by utilising bit (and sometimes sample rates) low enough to cause significant colouration and filtering within the audible frequency range.
The looper pedal is more of a utility pedal. It doesn’t add an actual effect, but it lets you record a segment of guitar which will then be played back through your amp. The idea is that live guitarists would use this when there are two guitar parts, but only one guitarist. So the process would look like this:
The guitarist may also employ various methods for selecting notes and chords, including fingering, thumbing, the barre (a finger lying across many or all strings at a particular fret), and ‘bottleneck’ or steel-guitar slides, usually made of glass or metal. These left- and right-hand techniques may be intermixed in performance.
Looper pedal: A looper pedal or “phrase looper” allows a performer to record and later replay a phrase, riff or passage from a song. Loops can be created on the spot during a performance (live looping) or they can be pre-recorded. By using a looper pedal, a singer-guitarist in a one person band can play the backing chords (or riffs) to a song, loop them with the pedal, and then sing and do a guitar solo over the chords. Some units allow a performer to layer multiple loops, enabling the performer to create the effect of a full band.[90] The first loop effects were created with reel-to-reel tape using a tape loop. High-end boutique tape loop effects are still used by some studio producers who want a vintage sound. Digital loop effects recreate this effect using an electronic memory.[91]
12 Stevie Ray Vaughan Stephen “Stevie” Ray Vaughan (October 3, 1954 – August 27, 1990) was an American musician, singer, songwriter, and record producer. In spite of a short-lived mainstream career spanning seven years, he is widely considered one of the most influential electric guitarists in the history of music, and …read more.
Shame not to see Hank Marvin or Jet Harris on any lists when so many claim they owe them debts of gratitude – certainly for hisory or electric guitar in Uk – also noting Hanks Spanish gypsy playing now
Some steel-string acoustic guitars are fitted with pickups purely as an alternative to using a separate microphone. They may also be fitted with a piezoelectric pickup under the bridge, attached to the bridge mounting plate, or with a low-mass microphone (usually a condenser mic) inside the body of the guitar that converts the vibrations in the body into electronic signals. Combinations of these types of pickups may be used, with an integral mixer/preamp/graphic equalizer. Such instruments are called electric acoustic guitars. They are regarded as acoustic guitars rather than electric guitars, because the pickups do not produce a signal directly from the vibration of the strings, but rather from the vibration of the guitar top or body.
Not a bad article, but I’d go even cheaper. As a long time guitar and bass player (no longer gigging) and father, with guitars high and low cost in the house, I would advise parents to get a new Yamaha, Epi, or Squier (or a good used one of those) for a couple hundred $ or less and a decent Fender or Vox,, Spider, etc modeler amp for the same and see what happens. It has been hard to keep my kids interested, hurts the fingers, and my guitars have low action and play like butter. It isn’t like Rock Star! Reportedly 90% drop out in the first year, and by the time you are my age maybe 99% have quit! Lot of used stuff in the closets out there! So go to a decent store or a friend who plays and seek their help and advice. And get it set up by someone who knows what they are doing. My current favorite setting out and being played a lot is a 1996 Korean Squier Strat Deluxe, used for $99. So if they say spend over $400 total amp and guitar, ask someone else! They lose value real fast!
With similar specs and style to the 1952 original – but without the $10,000 price tag – this LP-100 from Epiphone demands attention. As highlighted in our full review, with a classic Les Paul shape, the body is crafted from solid mahogany with a maple top, and features a bolt-on mahogany neck, with rosewood fingerboard, and 22 medium-jumbo frets. The guitar has solid hardware, including a LockTone tune-o-matic bridge and StopBar tailpiece, and 14:1 die-cast machine heads. Good looks and hardware aside, this electric guitar sounds fantastic. This is thanks to the two humbuckers – a 700T at the bridge and 650R at the neck – which offer full, warm tones that adapt to the majority of styles. Perfect for a beginner, although by no means an entry-level guitar.
A rack of rackmount audio compressors in a recording studio. From top to bottom: Retro Instruments/Gates STA level; Spectra Sonic; Dbx 162; Dbx 165; Empirical Labs Distressor; Smart Research C2; Chandler Limited TG1; Daking FET (91579); and Altec 436c.
Other handheld guitar and bass resonators on the market, manufactured under the tradename SRG, produced by Aescher Europa, in Germany, are available in both monophonic (one note at a time) and polyphonic (multiple notes at once) models, which include multiple onboard trigger switch effects, such as HPF (high pass filter) for enhancing harmonics and producing feedback effects, and LPF (low pass filter), producing a bass boost with a cello sound on heavy gauge strings. Later EBow models, such as the plus Ebow, contain a mode slide switch on the back, which allows the player to either produce just sustain or overtone feedback in addition to sustain.[72]

Phaser: A phaser or “phase shifter” creates a slight rippling effect—amplifying some aspects of the tone while diminishing others—by splitting an audio signal in two and altering the phase of one portion. Three well-known examples of phaser are the two handed tapping part on the Van Halen instrumental “Eruption” and the keyboard parts on Billy Joel’s “Just the Way You Are” and Paul Simon’s “Slip Slidin’ Away”.[80]
BTW, what you heard on Jimi’s video on this article is not what was being played out one the video. (ANY guitar player worthy of his salt would have caught on to that in one or two bars…OK, I’ll be accommodating…10 bars.
The majority of guitarists eventually come to a point where they’ve hit a rut in their playing. They may have gotten bored with their current go-to genre, or they may just feel that they’ve hit a wall in terms of what they can accomplish on their own.
A harmonizer is a type of sophisticated pitch shifter that combines the altered pitch with the original pitch to create a two note harmony based on the original pitch, or even with some pedals, three note harmony. Some hamonizers are able to create chorus-like effects by adding very tiny shifts in pitch.[88]
I think this list is confusing singers and entertainers with guitarists – Robert Johnson was a great Blues singer of the 1930’s he just used guitar to accompany, he is by no means a great guitar player, love the guy as I do BB King, but he is not a great guitarist either.
Firstly, I really appreciate the effort of the writer to actually go across genres to get this list sorted. For the purists out there who only listen to loud music, just accept the fact that you only stick to loud ones, you can never appreciate the soul of REAL guitar players…
Necks are described as bolt-on, set-in, or neck-through, depending on how they attach to the body. Set-in necks are glued to the body in the factory. They are said to have a warmer tone and greater sustain.[citation needed] This is the traditional type of joint. Leo Fender pioneered bolt-on necks on electric guitars to facilitate easy adjustment and replacement. Neck-through instruments extend the neck the length of the instrument, so that it forms the center of the body, and are known for long sustain and for being particularly sturdy.[citation needed] While a set-in neck can be carefully unglued by a skilled luthier, and a bolt-on neck can simply be unscrewed, a neck-through design is difficult or even impossible to repair, depending on the damage. Historically, the bolt-on style has been more popular for ease of installation and adjustment. Since bolt-on necks can be easily removed, there is an after-market in replacement bolt-on necks from companies such as Warmoth and Mighty Mite. Some instruments—notably most Gibson models—continue to use set-in glued necks. Neck-through bodies are somewhat more common in bass guitars.
{ “thumbImageID”: “RGA-series-RGAR42MFMT-Electric-Guitar-Flat-Dragon-Eye-Burst/J55980000002000”, “defaultDisplayName”: “Ibanez RGA series RGAR42MFMT Electric Guitar”, “styleThumbWidth”: “60”, “styleThumbHeight”: “60”, “styleOptions”: [ { “name”: “Flat Dragon Eye Burst”, “sku”: “sku:site51500000051296”, “price”: 499.99, “regularPrice”: 499.99, “msrpPrice”: 688.88, “priceVisibility”: “1”, “skuUrl”: “/Ibanez/RGA-series-RGAR42MFMT-Electric-Guitar-Flat-Dragon-Eye-Burst-1500000051296.gc”, “skuImageId”: “RGA-series-RGAR42MFMT-Electric-Guitar-Flat-Dragon-Eye-Burst/J55980000002000”, “brandName”: “Ibanez”, “stickerDisplayText”: “Top Seller”, “stickerClass”: “”, “condition”: “New”, “priceDropPrice”:””, “wasPrice”: “”, “priceDrop”: “”, “placeholder”: “https://static.guitarcenter.com/img/cmn/c.gif”, “assetPath”: “https://media.guitarcenter.com/is/image/MMGS7/RGA-series-RGAR42MFMT-Electric-Guitar-Flat-Dragon-Eye-Burst/J55980000002000-00-60×60.jpg”, “imgAlt”: “” } , { “name”: “Flat Blue Lagoon Burst”, “sku”: “sku:site51500000051295”, “price”: 499.99, “regularPrice”: 499.99, “msrpPrice”: 688.88, “priceVisibility”: “1”, “skuUrl”: “/Ibanez/RGA-series-RGAR42MFMT-Electric-Guitar-Flat-Blue-Lagoon-Burst-1500000051295.gc”, “skuImageId”: “RGA-series-RGAR42MFMT-Electric-Guitar-Flat-Blue-Lagoon-Burst/J55980000001000”, “brandName”: “Ibanez”, “stickerDisplayText”: “Top Seller”, “stickerClass”: “”, “condition”: “New”, “priceDropPrice”:””, “wasPrice”: “”, “priceDrop”: “”, “placeholder”: “https://static.guitarcenter.com/img/cmn/c.gif”, “assetPath”: “https://media.guitarcenter.com/is/image/MMGS7/RGA-series-RGAR42MFMT-Electric-Guitar-Flat-Blue-Lagoon-Burst/J55980000001000-00-60×60.jpg”, “imgAlt”: “” } ] }
Fingerboards vary as much as necks. The fingerboard surface usually has a cross-sectional radius that is optimized to accommodate finger movement for different playing techniques. Fingerboard radius typically ranges from nearly flat (a very large radius) to radically arched (a small radius). The vintage Fender Telecaster, for example, has a typical small radius of approximately 7.25 inches. Some manufacturers have experimented with fret profile and material, fret layout, number of frets, and modifications of the fingerboard surface for various reasons. Some innovations were intended to improve playability by ergonomic means, such as Warmoth Guitars’ compound radius fingerboard. Scalloped fingerboards added enhanced microtonality during fast legato runs. Fanned frets intend to provide each string with an optimal playing tension and enhanced musicality. Some guitars have no frets—and others, like the Gittler guitar, have no neck in the traditional sense.
While it’s true you don’t need to read music to play guitar, you do want to learn to read chord charts. A chord chart is a visual representation of a guitar chord. Chord charts are a little like music-by-numbers—they tell you which finger goes where and on what string, so in case you come up against a chord you don’t know, you’ll be able to play it.
Agree with JSL and Tony Completely, all of you ignorant people who say john mayer is not a good guitarist should take a listen to some of his acoustic stuff or JMT (John Mayer Trio) and be prepared to be blown out of the water. This guy is ridiculous.
Expand your musical vocabulary. Playing a C chord is nice, and it’s definitely a gateway chord that will lead you into more interesting musical territory, but there’s much more to music than that! Here are two other chords commonly used when playing in C Major. F, and G. Play a basic F chord like this:
are you people serious have you never heard of JOHN 5 used to be a guitarist for marilyn manson is currently the guitarist for rob zombie has 4 solo albums of just guitar music…….helllo……..JOHN frickin 5
{ “thumbImageID”: “C-1-Platinum-Electric-Guitar-Translucent-Black/H96103000001000”, “defaultDisplayName”: “Schecter Guitar Research C-1 Platinum Electric Guitar”, “styleThumbWidth”: “60”, “styleThumbHeight”: “60”, “styleOptions”: [ ] }
Boost pedals increase the output strength of the guitar signal before they hit your amps preamp. Consequently less gain is needed from your amp to get a distorted tone. So they keep your tone very clean but give it more of a push.
A guitarist (or a guitar player) is a person who plays the guitar. Guitarists may play a variety of guitar family instruments such as classical guitars, acoustic guitars, electric guitars, and bass guitars. Some guitarists accompany themselves on the guitar by singing or playing the harmonica.
Popular music typically uses the electric guitar in two roles: as a rhythm guitar to provide the basic chord progression and rhythm, and a lead guitar that plays melody lines, melodic instrumental fill passages, and solos. In some bands with two guitarists, both may play in tandem, and trade off rhythm and lead roles. In bands with a single guitarist, the guitarist may switch between these roles, playing chords to accompany the singer’s lyrics, and a solo.
[otp_overlay]

One Reply to “recording electric bass guitar | electric guitars by weight”

  1. {“eVar4″:”used: guitars”,”eVar5″:”used: guitars: electric guitars”,”pageName”:”[gc] used: guitars: electric guitars”,”reportSuiteIds”:”guitarcenterprod”,”eVar3″:”used”,”prop2″:”[gc] used: guitars: electric guitars”,”prop18″:”skucondition|0||creationdate|1″,”prop1″:”[gc] used: guitars”,”prop17″:”sort by”,”evar51″:”default: united states”,”prop10″:”condition”,”prop11″:”used”,”prop5″:”[gc] used: guitars: electric guitars”,”prop6″:”[gc] used: guitars: electric guitars”,”prop3″:”[gc] used: guitars: electric guitars”,”prop4″:”[gc] used: guitars: electric guitars”,”campaign”:”gcdirectsourcecode1″,”channel”:”[gc] used”,”linkInternalFilters”:”javascript:,guitarcenter.com”,”prop7″:”[gc] used”}
    Zappa – would have liked to hear him play with Hendrix – as a compliment not competition. Zappa, a classically trained musician, playing in a rock and roll world,had such depth of experience from without – as much as Hendrix had from within – too bad the intensity killed him; Zappa tamed it and had fun with it. Hendrix was driven by it. Great guitarist? Who cares! My picks are artists, something a machine, human or otherwise can not approach let alone touch, and that is what it is all about, touching the soul through music. One trick ponies are a dime a dozen – some of them are at the right place at the right time and their ego does the rest. Who will be remembered a hundred years from now – it will not be the “best”.
    Neck bending, by holding the upper arm on the guitar body and bending the neck either to the front or pulling it back. This is used as a substitute for a tremolo bar, although not as effective, and the use of too much force could snap the guitar neck.
    About time someone mentioned these guys! I couldn’t believe I was going this far down, without anyone bringing up the brilliant masters of the instrument from various music styles. Each individually is one of the greatest, but this list seems limited to the Blues – Rock progression only, a very limited view.
    Delay is another effect which does what it says on the tin. It delays your signal by a varying amount and then plays it back. This creates a doubling effect. The pedal will let you define how long the delay is.
    Whatever budget you’re on, you will always be able to find a suitable guitar. Even in the $100 price range you can find some models that play nicely. However, in that super-budget market there is a lot of garbage, so be careful. There’s a difference between ‘affordable’ and ‘cheap’, so do your research before buying something that may offer no value.
    If the book had been proofread better, I’d give it 5 stars. For example, there are places where the text has both a fret number and standard musical notation, and the fret number is wrong. The book refers you to play along with the instructional CD backing tracks, but it doesn’t tell you which track number to play. It’s easy enough to figure out what was meant, but a little more care would have been better.
    The solid-body electric guitar is made of solid wood, without functionally resonating air spaces. The first solid-body Spanish standard guitar was offered by Vivi-Tone no later than 1934. This model featured a guitar-shaped body of a single sheet of plywood affixed to a wood frame. Another early, substantially solid Spanish electric guitar, called the Electro Spanish, was marketed by the Rickenbacker guitar company in 1935 and made of Bakelite. By 1936, the Slingerland company introduced a wooden solid-body electric model, the Slingerland Songster 401 (and a lap steel counterpart, the Songster 400).

Leave a Reply

Your email address will not be published. Required fields are marked *